Some most commonly used tools in wood turning workshops include the woodworking band saw, with the wood lathe being the most popular. After the lathe and grinders have been purchased, to complete the wood tool set you need to buy band saw.

Woodworking band saw is a good tool for wood turners and wood workers for several reasons.
Like all woodworking machinery and equipment, it is important that the wood band saw machine be set up correctly, and regularly tuned and checked for band saw safety rules. Refer to your band saw guides for this.

Home wood shops typically include two wheel saws of fourteen inches in diameter. This measurement refers to the diameter of the wheels, and not the diameter of the cut, which is usually six inches.
These wheels resemble typical bicycle tires with rims and tires.

Though it will be new when a new saw is purchased, over time, through usage, the tires have to be brushed to remove accumulated dust which tends to stick to them. Green softwoods are notorious for this. The wheels also have to be lined up correctly.

They are lined up correctly when they are parallel to each other and are running coplanar. There should be a way in which the distance of the free running wheel is adjusted. This is the wheel that is not connected to the motor. This can be done in many ways, so you should consult the saw’s instruction manual to find out how.
Read the rest of this entry »

Band saws are powerful tools which uses a blade comprising of a continuous band of metal with metal teeth along one of its edges. When it comes to hardware tools of band saws, Jet Band Saws are becoming increasingly popular by the day. Band saws are generally utilized as metal cutting band saws or wood cutting band saws. Unlike other band saws, Jet Band Saws are uniquely designed to meet the needs of many woodworkers and metal workers today. All Jet Band Saws comes with a massive cast iron frame for increased power which makes it suitable to be utilized for all re-saw expectations. Most of them also have high tension spring design and many other amazing features.

Along with its unique designs, jet band saw parts are also well known for its durability and reliability. Jet band saw parts are also easily attainable if you’re ever in the position of requiring extra parts as they are a world wide brand and may be easily bought in major hardware stores or online. It is as easy as looking through an online jet band saw parts list for the desired jet band saw part of your choice then either look for the closest Jet store branch and buy in person or order online! These jet band saw parts list may be found on the official Jet website or other online hardware stores which sells jet band saw parts! Its that simple!
Read the rest of this entry »

Something About Delta Bandsaw

Delta Bandsaw: When it comes to home workshops Craftsman, Delta, and Lenox are among the most popular name and it’s not necessary to look beyond these at all.

The first thing to consider is of course your budget, but the good news is, you can probably find a reliable bandsaw in your price range.

Delta is famous for it’s line of good quality band saws with clean, simple cuts. Their prices are among the lowest for basic and durable band saws.

From The very beginning Delta is a good starter saw, It’s easy to assembly and to use. Also their band saws are solid choice for professional use on a budget.

Compared to craftsman Band Saws they are not as easy to clean and they do make a lot of sawdust but still their quality and price make up for these little shortcomings.

Many professional woodworkers recommend immediate replacement of the bandsaw blades but make sure you consult your dealer because not all blades are interchangeable and not all delta blades will fit delta band saws.

Though their smaller Band Saws like 9″, didn’t earn favorable reviews like larger and more expensive models. 14″ is a perfect Band Saw for any type cuts especially for hard woods while the 9″ inch delta Band Saw could be more than enough for cutting soft woods .

For more complex cuts ( hard woods like oak, walnut, or mahogany), the 14-inch Delta is a perfect choice. For simple cuts and soft woods ( pine ), the 9-inch delta band saw may be all that you need. Also, even though Delta motors are not rugged and strong enough for every day hard use in professional shops, for most hobbyists, the Delta motor is more than adequate.

Generally Deltas band saw earn very high marks for being rugged and accurate, regardless of price. More expensive Deltas ( above $800 ) are likely to exceed your expectations, but even the cheaper models ( up to $100 ) are able to satisfy many hobbyists.

Many of the larger Delta saws offer an optional wheel set. Wheel set is a smart investment if you need more elbow room when you’re working or if you are about to work with big pieces of wood that need extra support.

Setting up is easy and quick, but it’s recommended to have someone to help you because the parts are quite heavy. You won’t be needing anyone for blade because it’s quite easy and it doesn’t take much time.

If you are on a limited budget or you are a beginning woodworker Delta band saws are a perfect choice.

The proper blade for Bandsaw will give a better cut and make the job much easier and safer. There are 3 types of blade materials:
1. Bi-Metal
2. Hardback carbon
3. Flexback
Carbon blades
This is an economical blade made of flexible high carbon steel and it’s best To use it on high speed wood cutting saws. The teeth are heat treated to resist wearing and maintain sharpness. The body of the blade is soft enough and yet not too brittle. Carbon Hard Edge Flexback blades are used primarily for cutting wood and soft metals (aluminium and mild steel)
Bi-Metal blades
Just like the carbon steel blades, Bi-Metal blades have hard teeth and softer band. Bi-Metal blades are designed for cutting hard woods and all metals (from mild through stainless steel), basically for all tough materials where higher abrasion and temperature conditions are encountered. A piece of cobalt steel is laminated to a spring steel band which creates a blade that can withstand very high temperatures (operating cutting temperatures of 1000°F) and maintain tooth sharpness.
Carbide Tipped blades
Carbide is attached via ball and socket to the tip of each tooth. Carbide is then ground sharp. With it’s precision triple chip ground teeth Carbide tipped blade will outlast all others when cutting abrasive materials. Carbide tipped blades are harder than Bi-Metal blades and are ideal for re-sawing hard, abrasive or exotic woods. Carbide tipped blades will cut difficult materials such as stainless steel, titanium alloys and tool steels.

Beside Blade material you should pay attention to a few more things when buying new Bandsaw blade:
1. Blade Length – Simply measure the length of the blade needed.
2. Blade Width – It is important to use the correct width of the blade (recommended by the manufacturer) for your band saw. Usually you can use smaller width but under no circumstance you should go wider. A wide blade gives you more stability and a straighter cut. Narrower blade gives you tighter radius. In principle, the wider the Band Saw blade, the higher its beam strength and the better it can maintain straightness.
3. Blade Thickness – You should try to stay with the same thickness to avoid having to make adjustments when changing blades, because some blades of the same width come in different thickness. If you need to adjust your saw to different thickness follow the instructions for adjusting.

4. Pitch or Teeth Per Inch – To determine the number of teeth per inch, measure one inch of the blade from gullet to gullet and count the number of full teeth between them. This only works on constant pitches. Blades with more TPI (teeth per inch) will make a smoother cut but the blade will cut slower, a blade with fewer TPI will cut quicker but it will leave a rougher finish. For example for resawing, you need an aggressive blade, ( few TPI and as wide as the saw will accommodate).

The general rule is to have at least 3 teeth in the material at all times and run as wide a blade as possible for the particular job.

To prolong the life of your Band Saw blades and to stop them from wondering while cutting you should pay attention to the tension, and follow the instructions. According to many woodworkers it’s always better to add a bit more tension than indicated.

If you use your Band Saw to cut metal, you need a good cutting fluid for almost all materials. Cast iron should be cut dry and aluminum should be cut with power paraffin. You can choose between water soluble fluids or a neat cutting fluids.

Tooth forms in Band Saw blades are:

Raker tooth (S) – available in constant tooth pitches of 3-32 tpi blades and in the variable tooth pitch blades of 3-4 tpi to 10-14 tpi. Blades with this tooth form are suitable for short clipping materials (steel or cast iron) and small cross sections.

Hook tooth (K) – on blades with constant tooth pitches of 0.75-6 tpi and in blades with variable tooth pitches of 0.55-0.75 tpi to 4-6 tpi. Blades with this tooth form are suitable for long chipping tough materials, non ferrous metals and steels with a carbon content smaller than 0.8%, strong structural, rust resistant steels, acid resistant steels and large cross sections

Skip tooth (L) – on blades with constant tooth pitches of 2, 3, 4 and 6 tpi. Blades with this tooth form are suitable for fragile or brittle materials and large cross sections.

Trapezoidal tooth (T) – on blades with variable tooth pitches of 0.85-1.15 tpi to 3-4 tpi. Blades with this tooth form are suitable for high band sawing demands.